robert.lavendelblau.eu

Publikationsliste

Bücher

  1. Bitsche, R. D. (2009). Design and computational Analysis of Compound Castings and other Multi-Material Structures. VDI Verlag GmbH. (Fortschritt-Berichte VDI. Reihe 18: Mechanik - Bruchmechanik; No. 324). ISBN: 978-3-18-332418-7. 127 Seiten.

Publikationen in internationalen wissenschaftlichen Fachzeitschriften

  1. Dimitrov, N., Bitsche, R. D., Blasques, J. P. (2017). Spatial Reliability Analysis of a Wind Turbine Blade Cross Section Subjected to Multi-axial Extreme Loading. Structural safety, 66, 27-37, URL: http://dx.doi.org/10.1016/j.strusafe.2017.01.007.
  2. Haselbach, P. U., Bitsche, R. D., & Branner, K. (2016). The effect of delaminations on local buckling in wind turbine blades. Renewable Energy, 85, 295-305, URL: http://dx.doi.org/10.1016/j.renene.2015.06.053.
  3. Eder, M. A., Bitsche, R. D., Belloni, F. (2015). Effects of geometric non-linearity on energy release rates in a realistic wind turbine blade cross section. Composite Structures, 132, 1075-1084, URL: http://dx.doi.org/10.1016/j.compstruct.2015.06.050.
  4. Eder, M. A., Bitsche, R. D. (2015). A qualitative analytical investigation of geometrically nonlinear effects in wind turbine blade cross sections, Thin-Walled Structures, 93, 1-9. URL: http://dx.doi.org/10.1016/j.tws.2015.03.007.
  5. Blasques, J.P., Bitsche, R. D., & Fedorov, V. (2014). Accuracy of an efficient framework for structural analysis on wind turbine blades. Wind Energy, Published online. URL: http://dx.doi.org/10.1002/we.1939.
  6. Blasques, J. P., Bitsche, R. D. (2015). An efficient and accurate method for computation of energy release rates in beam structures with longitudinal cracks. Engineering Fracture Mechanics, 133, 56-69. URL: http://dx.doi.org/10.1016/j.engfracmech.2014.11.002.
  7. Eder, M. A., & Bitsche, R. (2015). Fracture analysis of adhesive joints in wind turbine blades. Wind Energy. 18(6), 1007-1022. URL: http://dx.doi.org/10.1002/we.1744.
  8. Todt, M., Bitsche, R., Hartmann, M. A., Fischer, F. D., & Rammerstorfer, F. G. (2014). Growth limit of carbon onions - A continuum mechanical study. International Journal of Solids and Structures, 51(3-4), 706-715. URL: http://dx.doi.org/10.1016/j.ijsolstr.2013.10.038
  9. Eder, M. A., Bitsche, R., Nielsen, M., & Branner, K. (2014). A practical approach to fracture analysis at the trailing edge of wind turbine rotor blades. Wind Energy, 17(3), 483-497. URL: http://dx.doi.org/10.1002/we.1591
  10. Daxner, T., Bitsche, R., & Böhm, H. J. (2007). Micromechanical Models of Metallic Sponges with Hollow Struts. Materials Science Forum, 539-543, 1857-1862. URL: http://dx.doi.org/10.4028/www.scientific.net/MSF.539-543.1857
  11. Daxner, T., Bitsche, R., & Böhm, H. J. (2006). Space-Filling Polyhedra as Mechanical Models for Solidified Dry Foams. Materials Transactions, 47(9), 2213-2218. URL: http://dx.doi.org/10.2320/matertrans.47.2213

Publikationen in Tagungsbänden

  1. Koch, M., Mattern, S., & Bitsche, R. (2018). Facing Future Challenges in Crash Simulation Engineering - Model Organization, Quality and Management at Porsche. In 15th International LS-DYNA Users Conference. 10-12 June 2018, Detroit, Michigan, USA.
  2. Zahle, F., Tibaldi, C., Verelst, D.R., Bak, C., Bitsche, R. & Blasques, J.P.A.A. (2015). Aero-Elastic Optimization of a 10 MW Wind Turbine. In Proceedings - 33rd Wind Energy Symposium. American Institute of Aeronautics & Astronautics.
  3. Courtney, W. T., Stolpe, M., Buhl, T., Bitsche, R., Hallum, N., & Nielsen, S. A. (2015). Optimal Design of Stiffeners for Bucket Foundations. In Proceedings of EWEA Offshore 2015 Conference. European Wind Energy Association (EWEA).
  4. Bennett, J., Bitsche, R., Branner, K., & Kim, T. (2014). Quick Method for Aeroelastic and Finite Element Modeling of Wind Turbine Blades. In Proceedings of ASME Turbo Expo 2014: Turbine Technical Conference and Exposition. [GT2014-26155] American Society of Mechanical Engineers.
  5. Blasques, J. P., Bitsche, R., Fedorov, V., & Eder, M. A. (2013). Applications of the BEam Cross section Analysis Software (BECAS). In A. Logg, K-A. Mardal, & A. Massing (Eds.), Proceedings of the 26th Nordic Seminar on Computational Mechanics. (pp. 46-49).
  6. Bak, C., Bitsche, R., Yde, A., Kim, T., Hansen, M. H., Zahle, F., Behrens, T. (2012). Light Rotor: The 10 MW reference wind turbine. In Proceedings of EWEA 2012 - European Wind Energy Conference & Exhibition. European Wind Energy Association (EWEA).
  7. Weigel, M., Nielsen, M., Gross, R., Bitsche, R., & Halter, P. (2011). Direct approach to determine static and dynamic behaviour of wind turbine blades for health monitoring and pitch control purposes. In Proceedings. European Wind Energy Association (EWEA).
  8. Jensen, F. M., Nielsen, P. H., Roczek-Sieradzan, A., Sieradzan, T., Branner, K., & Bitsche, R. (2011). On innovative concepts of wind turbine blade design. In Scientific Proceedings. (pp. 275-279). European Wind Energy Association (EWEA).
  9. Roczek-Sieradzan, A., Nielsen, M., Branner, K., Jensen, F. M., & Bitsche, R. (2011). Wind turbine blade testing under combined loading. Risø International Symposium on Materials Science. Proceedings, 32, 449-456.
  10. Bitsche, R., Berring, P., Jensen, F. M., & Jensen, C. (2010). State of the Art Finite Element Simulations of Wind Turbine Blades. Abstract from NAFEMS Nordic Seminar, Esbjerg, Denmark.
  11. Jensen, F. M., Bitsche, R., Branner, K., Sieradzan, T., Roczek-Sieradzan, A., & Berring, P. (2010). On Innovative Concepts of Future Wind Turbine Blade Design. In Proceedings NAFEMS Nordic Seminar, Esbjerg, Denmark.
  12. Branner, K., Bitsche, R., & Jensen, F. M. (2010). Effect of Strain Rate on Sandwich Web Failure in the Load Carrying Girder of a Wind Turbine Blade. In Proceedings of the 9th International Conference on Sandwich Structures, G. Ravichandran (ed.). California Institute of Technology.
  13. Bitsche, R., & Rammerstorfer, F. G. (2008). Stress singularities at interfaces in structures - Design charts. In Proceedings of the 11th East Asia-Pacific Conference on Structural Engineering and Construction. [B08_01] National Taiwan University.
  14. Daxner, T., Tomas, R. W., & Bitsche, R. (2008). Mechanics of Semi-Expanded Hollow Sphere Foams. In Porous Metals and metallic Foams: METFOAM 2007. (pp. 169-172). DEStech Publications.
  15. Rammerstorfer, F. G., Bitsche, R. D., Daxner, T., Fischer, F. D., Flatscher, T., Pahr, D. H. (2008). Computational Stability Analysis - Bridging the Length Scales. In Proceedings of the Taiwan-Austria Joint Workshop on Computational Mechanics of Materials and Structures. National Taiwan University, 28 - 30.
  16. Bitsche, R. D., Khalil, Z., Noster, U., Rammerstorfer, F. G. (2008). Simulation von Stahl-Leichtmetall Verbundguss-Strukturen - Herstellung und Mechanisches Verhalten. In 5. Ranshofener Leichtmetalltage 2008. U. Noster, F. Riemelmoser, P.J. Uggowitzer (ed.). ISBN: 978-3-902092-05-2; 87 - 98.
  17. Bitsche, R. D., Noster, U., Peterlechner, C., Rammerstorfer, F. G. (2006). Simulation von kraft- und formschlüssigen Hybridguss-Verbindungen als Designgrundlage. In 4. Ranshofener Leichtmetalltage 2006 - Vom Werkstoff zum Bauteilsystem. H. Kaufmann, P.J. Uggowitzer, U. Noster (ed.). ISBN: 3-902092-04-1; 275 - 288.
  18. Daxner, T., Bitsche, R. D., Böhm, H. J. (2006). Space-Filling Polyhedra as Mechanical Models for Solidified Dry Foam. In Porous Metals and Metal Foaming Technology. H. Nakajima, N. Kanetake (ed.). The Japan Institute of Metals, Sendai, 2006, ISBN: 4-88903-405-6, 441 - 446.

Akademische Arbeiten

  1. Bitsche, R. D. (2009). Design and Computational Analysis of Compound Castings and other Multi-Material Structures. Doktorarbeit, Technische Universität Wien. URL http://repositum.tuwien.ac.at/obvutwhs/download/pdf/1595763
  2. Bitsche, R. D. (2005). Space Filling Polyhedra as Mechanical Models for Solidified Dry Foams. Diplomarbeit, Technische Universität Wien. URL http://repositum.tuwien.ac.at/obvutwhs/download/pdf/1595367

Andere Publikationen und Präsentationen

  1. Bitsche, R. D., Thiele, M., Landschoff, T., Koch, M. (2017). Recent Developments in LoCo - Instant Collaboration in Simulation Data Management. Presented at: 11th European LS-DYNA Conference, 9 - 11 May 2017, Salzburg, Austria. (link).
  2. Bitsche, R. D., Geißler, G., Müllerschön, H. (2017). SDM and CAE-Processes with SCALE Solutions. Workshop: 11th European LS-DYNA Conference, 9 - 11 May 2017, Salzburg, Austria.
  3. Müllerschön H., Bitsche, R. D. (2016). Workshop: Simulation Data Management. Presented at: Nordic LS-DYNA Users Conference 2016, 14 October 2016, Gothenburg, Sweden.
  4. Bitsche R. (2015). Modelling of wind turbine blades with ABAQUS. Presented at: Composites Seminar, 12 March 2015, DTU Risø Campus, Roskilde, Denmark.
  5. Blasques J. P., Bitsche R., Branner K. (2012). High -fidelity models for wind turbine blades. In Annual Report 2012, Department of Wind Energy, Technical University of Denmark. Link
  6. Branner, K., Blasques, J. P., Kim, T., Fedorov, V., Berring, P., Bitsche, R., & Berggreen, C. (2012). Anisotropic beam model for analysis and design of passive controlled wind turbine blades. DTU Wind Energy. (DTU Wind Energy E; No. 0001).
  7. Nielsen, P. H., Tesauro, A., Bitsche, R., McGugan, M., Lynnov, C., Sørensen, F., Lukassen, T. (2012). Design and test of box girder for a large wind turbine blade. DTU Wind Energy. (DTU Wind Energy E; No. 0010(EN)).
  8. Bitsche, R. & Blasques, J. P. (2012). Optimizing Reliability using BECAS - an Open-Source Cross Section Analysis Tool. Wind Power Day 2012 - Optimizing Reliability. DTU Wind Energy.
  9. Bitsche, R. D. (2012). Structural Mechanics of Wind Turbines - Tools and Challenges. Seminar for master students at Risø Campus. DTU Wind Energy.
  10. Bitsche, R. & Blasques, J. P. (2012). BECAS - an Open-Source Cross Section Analysis Tool. Presented at DTU Wind Energy's stand at EWEA 2012, Copenhagen.
  11. Nielsen, P. H., Nielsen, M., Jensen, F. M., Berring, P., Roczek-Sieradzan, A., Roudnitski, V., ... Bitsche, R. (2011). Full Scale Test SSP 34m blade, Combined load. Data report. Roskilde: Danmarks Tekniske Universitet, Risø Nationallaboratoriet for Bæredygtig Energi. (Denmark. Forskningscenter Risø. Risø-R; No. 1749(EN)).
  12. Nielsen, M., Jensen, F. M., Nielsen, P. H., Berring, P., Martyniuk, K., Roczek, A., ... Bitsche, R. (2010). Full Scale Test of SSP 34m blade, edgewise loading LTT: Data Report 1. Roskilde: Danmarks Tekniske Universitet, Risø Nationallaboratoriet for Bæredygtig Energi. (Denmark. Forskningscenter Risø. Risø-R; No. 1718(EN)).
  13. Nielsen, M., Roczek-Sieradzan, A., Jensen, F. M., Nielsen, P. H., Berring, P., Sieradzan, T., ... Bitsche, R. (2010). Full Scale Test SSP 34m blade, edgewise loading LTT. Extreme load and PoC_InvE Data report. Roskilde: Danmarks Tekniske Universitet, Risø Nationallaboratoriet for Bæredygtig Energi. (Denmark. Forskningscenter Risø. Risø-R; No. 1748(EN)).
  14. Bitsche, R. D., Khalil, Z., Noster, U., Rammerstorfer, F.G. (2008). Simulation von Stahl-Leichtmetall Verbundguss Strukturen - Herstellung und mechanisches Verhalten. Druckguss, 07, 283-288. ISSN: 1619 - 2478.